DIY GE Georgia citizenship online 35x45 mm Photos: Equipment and Setup

Requirements

• Camera body: use a digital SLR or mirrorless camera with at least 12 MP sensor and full manual controls
• Lens selection: fit a 50 mm prime lens (or 85 mm on APS-C) to ensure natural perspective and minimal distortion
• Tripod: mount the camera on a sturdy, height-adjustable tripod set at the subject’s eye level for consistent framing
• Background: hang a smooth, non-reflective white or light-gray backdrop, free of wrinkles or patterns, with uniform coverage
• Key lighting: position two daylight-balanced (5500 K–6500 K) softbox or LED panels at 45° angles, 1–5 m from subject
• Light modifiers: use diffusers on lights and a reflector under the chin to eliminate harsh shadows and balance facial illumination
• Subject placement: place the subject 5–2 m from the backdrop to prevent cast shadows and maintain depth separation
• Camera settings: set ISO 100–200, aperture f/6–f/8, shutter speed 1/125–1/200 s for sharp, evenly exposed images
• White balance: employ a gray card or color-checker to custom-calibrate white balance for true-to-life skin tones
• Stability and triggering: use a wired/wireless remote or 2 s self-timer to avoid camera shake and ensure precise timing
• File capture & export: shoot RAW, then crop to 35×45 mm at 300 dpi and export as high-quality JPEG (24-bit color)

Step-by-Step Process

• First step: Select and prepare your equipment—a high‐resolution DSLR or mirrorless camera (minimum 12 MP) with a 50 mm lens for minimal distortion, a sturdy tripod to lock framing and height, and two adjustable softbox lights for even illumination.
• Second step: Set up a neutral background—use a matte white or light gray backdrop at least 2 m wide and 2 m tall, ensure it’s wrinkle‐free and evenly lit to avoid shadows or gradients.
• Third step: Position your lighting—place two softboxes at 45° angles on either side of the subject, 5 m away, set power to medium (around f/8 at ISO 100) to eliminate shadows on the face and background.
• Fourth step: Mount and align your camera—attach the camera to the tripod at eye level (about 6 m high), switch to portrait orientation, lock the tripod head so the sensor plane is perfectly vertical and centered on the backdrop.
• Fifth step: Configure camera settings—set ISO to 100–200, aperture to f/8–f/11 for sharpness, shutter speed to 1/125 s to freeze motion, white balance to “Daylight” or custom‐calibrated with a gray card.
• Sixth step: Frame and measure the subject—ask the subject to stand 5 m from the background, frame head and shoulders so the head height occupies 70–80% of the frame, use live view grid lines to center the eyes ⅔ up from the bottom edge.
• Seventh step: Capture and verify test shots—take 2–3 shots, review on camera LCD or tethered computer to check for even lighting, no red‐eye, correct white balance, and proper head size; adjust lights or distance as needed.
• Eighth step: Crop, resize, and export—import into photo software, crop to exactly 35 × 45 mm at 300 dpi (413 × 531 px), ensure head height is 31–36 mm, export as JPEG in sRGB below 200 KB, name file “GE_Citizenship_LastName_FirstName.jpg.”

Tips and Best Practices

• Background Setup: use a neutral, plain white or light grey backdrop placed at least 1 meter from the subject to avoid shadows, because uneven or colored backgrounds are a frequent reason for photo rejection.
• Lighting Placement: position two diffused light sources at 45° angles and avoid overhead lights, because harsh shadows or hotspots can obscure facial features and violate GE’s uniform illumination requirement.
• Camera Positioning: mount the camera at eye level, centered horizontally 5–2 meters from the subject, to prevent tilt or perspective distortion, since off-angle shots are often invalidated during automatic verification.
• Tripod Stabilization: use a sturdy tripod and self-timer or remote shutter to eliminate camera shake, because blurry images are a common DIY error that leads to rejection by automated quality checks.
• Resolution & Cropping: shoot at high resolution (minimum 600 dpi) and use a precise 35×45 mm template in editing software, ensuring the head occupies 70–80% of the frame, because incorrect dimensions or pixelation will cause the online system to flag and reject your upload.

Conclusion

In summary, capturing compliant 35 × 45 mm photos for Georgian citizenship online requires the right gear, precise framing, consistent lighting, and strict adherence to official size and file specifications.

• Camera: Use a high-resolution DSLR or smartphone with manual focus to ensure sharp detail
• Tripod: Stabilize your device and use a remote trigger to eliminate motion blur
• Lighting: Position two soft, diffused light sources at 45° angles for even, shadow-free illumination
• Background: Set up a plain white or light gray backdrop free of textures and wrinkles
• Framing: Maintain a 50 cm distance, keep head height at 70–80% of frame with a 5 mm top margin
• Expression: Adopt a neutral facial expression with eyes open, mouth closed, and no accessories
• File Specs: Export as JPEG at 600 × 771 px, 300 dpi, under 500 KB with no filters or compression artifacts
• Printing: Print at true scale on matte photo paper with ISO-compliant ink and no borders
• Verification: Cross-check the final image against Georgia’s official checklist before submission