DIY RU Russia internal Passport for Gosuslugi, 35x45 mm Photos: Equipment and Setup

Requirements

• Camera: use a DSLR or mirrorless camera with at least 10 MP and manual exposure controls to capture crisp, high-resolution images.
• Lens: choose a 50–85 mm focal length prime or zoom lens (full-frame equivalent) to minimize facial distortion and maintain natural proportions.
• Tripod: mount the camera on a sturdy, height-adjustable tripod with a bubble level to ensure eye-level framing and eliminate motion blur.
• Background: set up a plain white or light-gray, non-textured backdrop large enough to fill the frame; ensure it’s wrinkle-free and non-reflective.
• Lighting: position two diffused light sources (softboxes or LED panels) at 45° angles to the subject’s face and add a fill light if needed to remove shadows under the chin and behind the head.
• Distance & framing: place the camera 5–2 meters from the subject; center the head in the frame so shoulders are visible and the top of the head has a 2–5 mm margin from the photo edge.
• Head size & position: adjust framing so the distance from chin to crown is 32–36 mm and the eye line sits approximately 18 mm from the top edge of the 35×45 mm crop.
• Color balance: use a gray card or white-balance target during setup and set manual white balance to ensure neutral background and accurate skin tones.
• Focus & sharpness: select single-point autofocus on the subject’s eyes or use manual focus; zoom in on the camera’s LCD to confirm sharp detail before shooting.
• Calibration & measurement: use a printed ruler or grid behind the camera viewfinder to verify exact head dimensions and final 35×45 mm crop proportions.
• File format & resolution: save photos as high-quality JPEGs (minimal compression) or TIFFs at ≥600 dpi to preserve detail when printed at 35×45 mm.
• Printing & cropping: print on matte or semimatte photo paper using a professional dye-sublimation or inkjet printer; trim precisely to 35×45 mm with a clear edge margin.

Step-by-Step Process

Content about DIY RU Russia internal Passport for Gosuslugi, 35x45 mm Photos: Equipment and Setup - process

Tips and Best Practices

• Choose the Right Camera: use a high-resolution digital camera or modern smartphone with at least 8 MP to capture sharp details—low-res images can blur facial features and lead to rejection
• Master Your Lighting: position two soft light sources at 45° angles or shoot in bright, indirect daylight to eliminate harsh shadows and glare—uneven lighting can obscure your face and distort skin tone
• Set Up a Neutral Background: hang a smooth, matte white or light-gray backdrop at least 1 meter behind you to prevent shadows and color cast—busy or wrinkled backgrounds violate the uniformity requirement
• Use a Tripod and Level Alignment: mount the camera on a tripod at eye-level and frame the head so the top of the hair is 5 mm from the top edge and chin is 5 mm from the bottom—hand-held shots often result in tilted or off-center photos
• Configure White Balance and File Settings: switch your camera to “daylight” or manually set white balance, save as uncompressed JPEG at 600 dpi and 24-bit color depth—automatic white balance and aggressive compression can introduce color casts and artifacts

Conclusion

In summary, creating a compliant DIY 35×45 mm photo for your Russian internal passport via Gosuslugi hinges on five pillars: equipment choice, lighting, background, framing, and digital processing. Follow these key points to ensure acceptance:

• Camera: use a DSLR, mirrorless, or high-end smartphone with at least 12 MP and a fixed-focal-length lens (≈50 mm equivalent)
• Lighting: position two softbox lights at 45° angles, daylight-balanced (≈5500 K), to produce even, shadow-free illumination
• Background: use a smooth, neutral light-gray backdrop (5 × 2 m), lit separately to avoid gradients or shadows
• Framing & composition: mount the camera on a tripod, center the head in a 35 × 45 mm frame, ensure head height is 32–36 mm and eye-line 21–24 mm from the top
• Post-processing & upload: crop precisely, limit brightness/contrast edits to ±10 %, save as 300 dpi JPEG under 200 KB following Gosuslugi’s file-size rules